How to Talk About Mtb Frame in Dreaming Best?

Why is The Carbon Mtb Frame The Most Important?

When you look at a bike, it’s easy to see that the 29er frame is the most important part of the bike.
Not only does the carbon mountain bike frame hold the entire bike together and allow you to ride on it, but it’s also a testament to the quality of the materials used.
The mtb frame 29 is often the deciding factor in whether the bike can win the race, keep you comfortable or get from point A to point B safely.

Carbon MTB Frame SDY20

The carbon fiber mountain bike frame is made of carbon fiber.
Carbon fiber is the lightest material, followed by titanium, which is also the strongest of all the materials used for carbon fiber mtb frames.
The quality of these xc mtb frames varies widely.
Your local bike shop can recommend the right mtb cycle frame material for you.

Buy A New or Replace Cheap Mtb Frame

When shopping for a new car, the 29er mountain bike frame can certainly be considered one of the most important or integral parts of a bike.
If you look closely at the suspension frame, but if the dual suspension mountain bike frame has to be replaced, it’s almost worth the time to buy a brand new bike.

Break Down The Bike

The importance of a dual suspension frame becomes very clear when determining the type of bike that is right for you.
You can also see if it fits according to the carbon fiber full suspension mountain bike.

Price and Quality

Choosing a high-quality 29er full suspension frame can change the overall look, feel and ride of your bike.
As the most expensive part of a bike, replacing a hardtail frame is much more expensive than installing a new seat or handlebar, which is why it’s important to choose a higher quality aggressive hardtail frame compared to other parts.

Safety

The carbon hardtail frame can easily be considered the most integral part of the bike because of how safe it is to choose a 29er hardtail frame that is too big or too small for your stance.
It’s all about the best hardtail frame, which sets the balance for a comfortable, safe ride.
The size of a light frame bike can also be a hazard when storing, carrying, or lifting as it takes up the majority of the bike.
There are many factors that determine the correct size of a lightweight frame bike.
This is why most cycling professionals and enthusiasts do a thorough inspection of the xl frame mountain bike when shopping for a new mountain bike.

Carbon MTB Frame MFM100

Although it may look similar to the average observer, each 21-inch frame mountain bike has a different size, symmetry, and materials used that are tailored to the rider’s specific body structure.
Most of the Chinese carbon frame mtb on the market today are usually made of carbon fiber.
This makes the trail frameset structurally strong yet very light, making it easy for cyclists to handle.
While there are still cheap full suspension frames made of galvanized iron or steel, these rigid frames are rapidly disappearing and being replaced by aluminum and some other lighter materials.

Carbon MTB Frame SDY21

If you’re a cyclist, you’ll love the lightest material for your mtb frame.
The mountain bike frame made of carbon fiber is almost weightless, yet strong enough to withstand the rigors of an off-road bike.
This is why most bike enthusiasts still prefer mountain bike carbon fiber because they are very affordable.
While they may not be as good as those mtb frame 29ers, the mtb bike frame does a very good job on all types of tracks.

Carbon MTB Frame MFM200

Another consideration you have to double-check is the size of the best mtb frame.
Keep in mind that the carbon mtb frame 29er comes in different sizes, which correspond to the height and physique of the rider.
The size of the best mountain bike frames is usually determined by measuring the width of the full suspension frame from the center of the base bracket to the uppermost part of its top tube.
Choosing the right carbon 29er frame is important because it affects how you handle the bike.
Remember that all full suspension mtb frame sizes are influenced by the unique body structure of the rider.

Carbon MTB Frame SDY21 Bundle Sale

That’s why you must carefully choose a full suspension mountain bike frame with a size that closely matches your own physique.
Once you’ve determined the weight and size of the full suspension MTB frame that best fits your body structure, you’re ready to go.

Please be free to click TRIFOX.

The benefits of long-term cycling

Cycling is a healthy and natural way to travel, which not only allows the cyclist to fully enjoy the beauty of the riding process but also brings certain benefits to the cyclist’s body. Why do you say that? Here are some of the benefits of riding a carbon fiber road bike for riders to better understand:

1. Improve memory

Cycling has a memory-boosting effect for people with both strong and weak memories because exercise helps increase levels of norepinephrine in the body, and increased levels of this chemical in the brain can improve memory have an important role.

2. Alleviate Parkinson’s disease

Cycling, especially hard cycling, can improve activity in areas of the brain involved in exercise. Cycling is an effective and inexpensive way to treat Parkinson’s disease, says Cleveland Clinic researcher Dr. Chitan Sha. However, not all patients with Parkinson’s disease are suitable for high-intensity exercise. Before exercising, you should seek a doctor’s advice and do what you can.

3. Prevent cancer

Lack of daily exercise is one of the bad behaviors that are prone to cancer. Long-term adherence to cycling can enhance cardiovascular function, especially aerobic exercise, improve human metabolism and immunity, and play a role in fitness and cancer prevention.

4. Makes the lower body stronger

Cycling is mainly based on leg movement. Scientists’ experimental statistics show that for every 1 kilometer of cycling, the 26 pairs of muscles in the lower limbs need to exercise 180 to 200 times. At the same time, the three pairs of large joints of the lower limbs can also participate in the activities, which can enhance the bouncing power of the legs and delay the aging process of the joints and ligaments of the lower limbs.

5. Improve your sleep quality

Getting up early for a bike ride can make you feel less sleepy for a short period of time, but in fact you sleep better with your eyes closed. When researchers at the Stanford University School of Medicine asked insomniacs working sedentary jobs to cycle for 20-30 minutes a day, those with insomnia halved the time it took to fall asleep and increased sleep time by almost an hour.

Feel free to check our trifoxbike official website to know more details.

The Basics of Road Biking

Road bicycles, commonly known as bicycle racing, are bicycles designed for road riding and can be used in road cycling competitions.

The road bicycles referred to here refer to road bicycles for competition, not bicycles suitable for asphalt roads in general (such as touring bikes, and folding bikes). A standard road bike generally includes a frame, front fork, wheelset, kit, head tube (also known as a spigot), handlebars, seat cushion, seat tube, pedals, chain, and flywheel.

The most important characteristics of a road bike are its weight and speed.

1. In terms of weight, road bicycles widely use new materials on the frame and various components, such as aluminum alloy, carbon fiber, and titanium alloy, so as to reduce the weight of road bicycles and achieve the goal of being lightweight.

2. In terms of speed, the design of road bicycles will give priority to aerodynamics and give up a certain degree of comfort. For example, road bicycles generally use flat front forks, the position of the lower handle is generally lower than the seat cushion, and the width of the outer tire is relatively large. Small. Also, road bikes have a very large cassette-to-chain ratio (i.e., gear ratio), usually 53:11 or higher.

In addition, the standard riding position of road bikes lowers the body stance and reduces the frontal area to the wind, reducing wind resistance and enabling higher speeds.

Carbon Road Bike Frame X10

Of course, the soul of a road bike is the frame, and a good frame can give a road bike a huge boost. Compared with the frame made of aluminum alloy or titanium alloy, I am more optimistic about the frame made of carbon fiber. The advantages of carbon fiber frames are very obvious. They are light in weight, high in strength, strong in rigidity, and high in plasticity. They are ideal materials for manufacturing advanced sports bicycle parts. performance.

Combined with these characteristics of carbon fiber, the development of carbon fiber road bike frames is gradually improving. It is believed that more and more riders will realize the importance of carbon fiber road frames to road bicycles and use it to assemble their own bike!

Feel free to check our trifoxbike official website to know more details.

The frame is the soul of the bike

For riders, it is very important to have a good frame for their bike, because the frame, as the skeleton of the entire bicycle, determines and affects the correctness and comfort of the riding posture to the greatest extent.

Of course, the material of the framesets will also affect the rider’s riding experience to a certain extent. Here, I strongly recommend one of the best road bike frames of trifoxbike: X10TA made of carbon fiber.

Carbon Road Bike Frame X10

carbon fiber raw materials for X10TA are derived from Toray T800 high-quality. The carbon fiber is flexible on the outside and rigid on the inside. It is lighter than aluminum alloy, but has more strength than steel. It has the characteristics of corrosion resistance, shock resistance, and high modulus. It is important material and is always used in national defense, military, and civilian applications. It not only has the inherent characteristics of carbon materials, but also has the soft processability of textile fibers. It is a new generation of reinforcing fibers that has many excellent properties.

The frame adopts one-piece molding technology, so that the frame has a good force distribution performance. And the high-rigidity geometric structure of the frame makes the stability of the frame, the lateral rigidity of the front fork, the rigidity of the bottom bracket, and the comfort of the frame all achieve harmony and unity, the frame incorporates every tube and every detail into aerodynamics and ergonomics. The design concept is to reduce the hand offset from the tube shape, enhance the lateral rigidity, and provide pedaling efficiency, more like A comprehensive and high-performance tank, its advantage lies in its compatibility.

Carbon Road Bike Frame X10

Its available colors are red/camouflage/white, red symbolizes unrestrainedness, courage, and fighting spirit, camouflage symbolizes glory and firm belief, and white symbolizes peace and holiness. I believe that these colors of the frame can meet your expectations for the bike you assemble yourself.

Feel free to check our trifoxbike official website to know more details.

A road bike frame for women

Women’s body shape and muscle composition are very different from men’s. Although not everyone meets these criteria, women are generally more flexible, weigh less, have lower elevations, have wider ischial tuberosities, narrow shoulders, shorter arms, and have a larger leg-to-torso ratio …and these all affect the setting of road bikes. Even a man and a woman of the same height will not choose exactly the same frame due to differences in body proportions, flexibility, muscle strength, and other factors.

Therefore, many powerful bicycle brands have begun to separate women’s models from the traditional frame design. Even bicycle brands that do not launch women’s models will agree that female riders do need smaller bikes frame, targeted women’s saddles, and narrower handlebars.

You might as well have a look at the women’s frame bike sold by trifox: X8TA. Especially the pink one, which is loved by women.

Carbon Road Bike Frame X8TA

Thru-axle disc brake Carbon Road Bike Frame X8 is a 700C Road Bike Frame, available size in 48cm/51cm/54cm/56cm, has the following characteristics:

(1). Trifox X8 adopts a carbon fiber integrated molding process, three-dimensional guide type integrated aero pipe type, internal routing aerodynamic propel design, full sense of strength, the combination of sports and equipment aesthetics, and the special processing method of carbon fiber makes the frame without Joint gaps, with consistent visual aesthetics that other frame materials don’t have.

(2). The internal routing design, the wiring from the upper tube of the frame head, is simple and beautiful.

(3). The carbon fiber raw materials are derived from Toray T800/T1000 high-quality. The carbon fiber is flexible on the outside and rigid on the inside. It is lighter than aluminum alloy but has more strength than steel. It has the characteristics of corrosion resistance, shock resistance, and high modulus. It is important material and is always used in national defense, military, and civilian applications. It not only has the inherent characteristics of carbon materials but also has the soft processability of textile fibers. It is a new generation of reinforcing fibers that has many excellent properties.

Carbon Road Bike Frame X8TA

(4). Ultra-light carbon fiber front fork: the aerodynamic design of breaking wind, taking into account lightness and strength, riding faster and more comfortably.

(5). Carbon fiber windbreaking aero Seatpost: The lay-back drop-shaped tube design, with a smaller windward surface, effectively reduces the wind resistance of cycling and makes riding more enjoyable.

(6). Hidden Seatpost clamp, beautiful and fashionable.

(7). 2-year warranty service.

Of course, X8TA is not only suitable for women, its other two colors matching red/yellow are also suitable for men to buy.

Feel free to check our trifoxbike official website to know more details.

This article lets you understand the advantages and disadvantages of carbon fiber as a bicycle frame material

Carbon fiber is a high-strength and modulus high-temperature resistant fiber, which is a high-end variety of chemical fiber. It is mainly composed of carbon atoms and is about 5-10 microns in diameter.

To create carbon fibers, carbon atoms are bonded together in the crystals, and the parallel alignment of the long axes of the fibers gives the carbon fibers a relatively high strength-to-volume ratio. Thousands of carbon fibers are bundled together to form a fiber bundle that can be used alone or woven into a fabric.

Carbon fiber as a bicycle material has the following advantages：

1. Extremely lightweight:

Carbon fiber road frames of around 1200 grams have been seen everywhere. Since the mass of carbon is only 1.6 grams per cubic centimeter, it is no longer a dream to make a frame of about 1 kg.

2. Good shock absorption performance.

Carbon fiber can effectively absorb shock and maintain good rigidity. This feature allows carbon fiber bicycles made from it to travel on very steep mountain roads

3. Frames of various shapes can be made.

Different from the manufacturing process of general metal frames, carbon fiber frames are generally first made of molds, then put carbon fiber sheets on the molds, and finally cemented with epoxy resin. This manufacturing process can use aerodynamics to create a frame with minimal wind resistance.

At present, the main shortcomings of this material are the following shortcomings:

1. Complex stress calculation.

The carbon fiber frame is composed of carbon fiber, which is characterized by strong tensile strength, but weak shear strength. Complex stress calculations (longitudinal rigidity and transverse rigidity) are required during processing, and carbon fiber sheets are overlapped and formed according to the calculation.

Generally speaking, the impact resistance of the carbon fiber surface is quite good, but the puncture resistance is very poor. That is to say, it doesn’t matter if you fall horizontally and vertically, but you are afraid that you will encounter one or two sharp pebbles during the horizontal falling and vertical shooting.

2. The price is expensive.

Compared with titanium alloy, the price of a carbon fiber frame is even more expensive. The price of the top carbon fiber frame is tens of thousands. This is mainly because the production process of carbon fiber frames requires a lot of manual work, and the scrap rate is very high, resulting in a large increase in cost.

Feel free to check our trifoxbike official website to know more details.

A brief introduction to one of our best road bike frames: X8TA

Trifox Road Bike Frame X8TA is one of the best road bike frames that adopts a carbon fiber integrated molding process, three-dimensional guide type integrated aero pipe type, internal routing aerodynamic propel design, full sense of strength, the combination of sports and equipment aesthetics, and the special processing method of carbon fiber makes the frame without Joint gaps, with consistent visual aesthetics that other frame materials don’t have.

The internal routing design, the wiring from the upper tube of the frame head, is simple and beautiful.

The carbon fiber raw materials are derived from Toray T800 high-quality. The carbon fiber is flexible on the outside and rigid on the inside. It is lighter than aluminum alloy but has more strength than steel. It has the characteristics of corrosion resistance, shock resistance, and high modulus. It is important material and is always used in national defense, military, and civilian applications. It not only has the inherent characteristics of carbon materials but also has the soft processability of textile fibers. It is a new generation of reinforcing fibers that has many excellent properties.

The accessories it comes with also have the following characteristics:

Ultra-light carbon fiber front fork: the aerodynamic design of breaking wind, taking into account lightness and strength, riding faster and more comfortably.

Carbon fiber windbreaking aero Seatpost: The lay-back drop-shaped tube design, with a smaller windward surface, effectively reduces the wind resistance of cycling and makes riding more enjoyable.

Hidden Seatpost clamp, beautiful and fashionable.

Feel free to check our trifoxbike official website to know more details.

The manufacturing process of carbon fiber frame

What we call carbon fiber is actually a composite material with carbon as the main material, and carbon fiber composite material is not the only material in bicycle frames, rims, and carbon bars. This is because the ultra-high rigidity of carbon fiber is a prerequisite for the process. When the material is a 100% carbon fiber composite material, it is very fragile and has a tendency to tear in the fiber direction. In order to exert its rigidity, the carbon fiber (cloth) is dipped in epoxy resin before molding, forming a composite material.

However, the carbon fiber contained in the carbon fiber resin is expensive, generates a large amount of CO 2 during the production process, and is difficult to handle, so the environmental load is high. Therefore, methods of recovering and recycling carbon fibers from used carbon fiber resin moldings are being studied. Carbon fiber recycling is beneficial to the production of carbon fiber frames.

Manufacturing steps of carbon fiber frame

(1).

The first is to weave yarn and make carbon yarn into carbon fiber composite materials of various specifications. The process of weaving yarn is similar to weaving cloth, that is, carbon yarn is woven into various carbon cloth raw materials through mechanical weaving according to technical standards, and then carbon The cloth is soaked in the corresponding resin solution and then dried and molded to fix the carbon cloth. It is interesting that in order to prevent the deformation of the carbon yarn, it is sometimes stored in cold storage.

(2).

The carbon yarn is scientifically cut, and each piece of carbon cloth is marked in detail. Each carbon fiber frame is made of hundreds of different carbon cloths. Large pieces of carbon cloth will be roughly cut into sheets that are easy to handle. A-frame is made up of more than 500 individual carbon cloth collages. Each model requires a specific type of carbon cloth, and even if the same mold is used, the amount of carbon fiber cloth varies.

(3).

Once again, it is the coil material, that is, laying the cut carbon fiber prepreg on the core material in a specific order and angle to make it initially have the shape of the frame, waiting for the next step of curing, the coil material operation of the Ruibao factory is closed. It is carried out in a clean room, and the environmental requirements are very strict. Since some commercial secrets and technical patents are involved, only a small part of the complex process can be seen here.

(4).

Entering the forming stage is to place the rolled product in the forming die and extrude it at a high temperature. The carbon fiber die is also a link where technology and cost are concentrated. It is necessary to ensure that the die and the frame have the same thermal expansion rate, which is important to ensure the frame. Accuracy plays a very important role, especially in today’s increasingly demanding manufacturing precision of bicycles.

(5).

For the parts that cannot be integrally formed, they are formed by special glue between the parts, and then fixed into a complete whole by high-temperature baking. At this time, the glued frame will be clamped on a special carbon fiber fixture and sent to the curing oven for curing. When the curing process is completed, the frame can be taken out of the curing oven and removed from the fixture.

(6).

Finally, the frame is hand sanded and refinished, drilled, etc. After sanding and trimming, the frame is ready for final painting and decals, with wet transfer decals being done before varnishing. Then a beautiful and powerful carbon frame is complete.

Feel free to check our official website: https://www.trifoxbike.com/ to know more details.

Best MTB Frames for You to Build Your Dream Bike

There is a wide variety of bicycle frames available online for each different cycling discipline, from MTB to gravel, to touring. Some frame styles have barely changed over the decades, while others incorporate modern design technology that has only emerged recently.

It’s important to buy the correct frame for the riding style you intend to partake in, otherwise, you could end up damaging your frame or injuring yourself. Here we examine the differences between each type of bike frame and the riding style that they’re intended for.

While most bicycles are built around a specific geometry that serves a certain purpose – there are always many more factors in play. Factors such as materials, design, fork travel, and many more make the bicycle whole. While each of us has our preferences in terms of how the bike should feel, there’s a lot that can be adjusted from frame to little details around it.

Best Hardtail Mountain Bike Frames

Hardtail MTB frames are considerably less complex than full-suspension frames. Although newer models have advanced geometry, hardtail MTB frames typically look like early mountain bikes. They consist of a traditional bike frame with two triangles split by the seat tube and a suspension fork on the front.

Depending on the style of riding the bike is intended for, hardtail MTBs have varying head and seat tube angles. This is largely to do with the amount of travel in the fork, which is usually more if the bike is intended for downhill riding.

Best Full-suspension Bike Frames

Full suspension mountain bike frames are the most complex of bike frame designs, with the most moving parts and mechanical components. They consist of two separate frame triangles on the front and rear, connected by pivots and links so that each one can move individually.

Connected to the front triangle and a pivot point on the rear triangle is a coil or air-sprung shock absorber. Rather than directly under the seat like on a motorbike, this suspension design pivots from the center of the bike so the rider doesn’t flip over forward on steep descents. When combined with a front suspension fork, this provides the best possible suspension that you can get on a bicycle.

These are the main points for choosing the best mountain bike frames to build your dream bike, feel free to visit our official website to get more info: https://www.trifoxbike.com/

Best XC MTB Frame Buying Guide

MTB frames are built for riding at speed off-road but there is a huge variety on the market, with types to suit every possible riding discipline and riding style – from lightweight carbon racing whippets to burly bruisers that can take on the toughest terrain. In the first instance, MTB frames fall under two main categories: hardtail and suspension frames. In this article, we will talk about hardtails xc MTB frames.

Hardtails: As the name suggests, hardtail (HT) MTBs forego rear suspension in favor of a fully rigid frame. They are generally lighter and less expensive than their full-suspension cousins so are commonly used as the basis for entry- or mid-level bikes, or else for lightweight top-end racers. Some people, however, just prefer to ride a hardtail. Some of the most common categories of hardtail frames are race, trail, and dirt/street/4X.

Race: These frames are aimed at cross-country (XC) racers, long-distance marathon-style events; less technically challenging trail center runs, and just generally covering plenty of off-road miles. They typically feature relatively steep head and seat angles (a seat angle of around 73 degrees and a head angle of around 71 degrees being considered ”classic’ XC geometry), placing the rider in the optimum position for seated pedaling, especially uphill. Top tubes will meanwhile be on the long side, allowing for the ”stretched’ riding position that enables riders and racers to get plenty of air into their lungs.

Race frames are typically made from aluminum allow (for low- to mid-level offerings) or carbon fiber (for high-end models). They are designed for 80-100mm travel forks and 26”, 27.5”, or 29” wheels, with the latter being increasingly common.

Trail: More and more hardtail frames have departed from the ”classic’ XC design above (steep angles, 80-100mm travel) in favor of slacker angles and longer-travel forks. These modern trail hardtails of 120-140mm front travel offer many riders the perfect balance between lightweight pedaling efficiency and rough-and-tumble high-speed fun.

Seat and head angles are a little slacker (head angles of 69 degrees or less being characteristic of the modern trail hardtail) so that riders can get their bodyweight well back on the bike on steep, technical downhill trails. Top tubes are generally shorter, giving a more upright riding position which is not optimum for all-day pedaling but gives much greater rider control on difficult terrain.

Frame materials are typically aluminum or steel, the lively and supple ride feel of the latter has made it increasingly popular among modern trail hardtail riders not overly concerned with the slight weight penalty involved, with 26” or 27.5” wheels.

Street, dirt, and 4X: Hardtails frames built for the demanding disciplines of dirt jumping (DJ), street riding, and four-cross racing (4X) are designed less with pedaling efficiency in mind than with the ability to take serious and sustained punishment, and live to tell the tale.

DJ and street bikes generally feature overbuilt aluminum or steel frames which are tougher and heavier than those found on their xc and trail counterparts, with smaller sizes providing increased agility in the air and ”clickability.

The frames are married to 26” wheels and around 100mm of suspension travel courtesy of stiffly-sprung front forks.

For more info about XC MTB frame please visit our official website: https://www.trifoxbike.com/